THE WORLD'S PREMIUM AIRCRAFT HANGAR DOOR PROVIDER
This hydraulic door goes straight into your opening on arrival. No need to assemble it.
Hydraulic cylinders, hard lines, hoses and door seals can be pre-installed too.
By removing the majority of duties associated with installing hydraulic doors, we're lowering your install time and cost.
At AeroDoor we offer expert service,
impartial advice and the right deal for you.
• A single source for all hangar doors and commercial doors.
• AeroDoor can deliver, install and service all of your doors.
• 30-years experience in hangar door design and services.
• AeroDoor engineers and project managers will work with you.
• A strong, safe and sealed hydraulic door.
• We offer 1, 3, or 7 year warranties with our doors.
• We can deliver, install and service your door.
• Reduce install and labor costs with a one-piece door.
AeroSwing hydraulic doors can be sheeted and insulated in almost anything.
Which means you can achieve or exceed your own performance and energy requirements.
We can upgrade, service or repair most hydraulic doors, regardless of brand or model.
Preventive maintenance is the heart of our service concept and an AeroDoor service engineer is the best insurance for reliable operation and any regulatory compliance.
Every hydraulic door is individually designed, engineered and manufactured to your exact specifications.
Your door is designed to perform in your location. It will not fall if a hydraulic line bursts or leaks and components are UL approved.
Hydraulic doors are manufactured using structural steel materials to deliver longevity, strength and minimum loads on your building.
Sheeting & insulation is your choice. Choose standard building sheeting or use leading thermal, energy efficient wall panel solutions.
Seal between door and doors frame is tight meanwhile a reinforced rubber seal on the bottom of the door stops dust and sand intrusion.
AeroSwing hydraulic doors are built to meet local wind loads and compliant with all building and electrical codes.
Your hydraulic door can be designed to include customized window arrangements, walk doors, remote door operation and more.
There's only 3 main components to Aero hydraulic doors indicating low in life service costs for the owner.
*Not a standard feature.
Description:
Hydraulic operated, swing door. The door is pre-hung inside it's own steel frame.
Door Width:
Door Height:
Built to your width
Built to your height
Fitting:
Steel:
Wind & Building Codes:
Coating Finish:
Door frame fits against your header and jambs.
Constructed of ASTM 500 hot rolled structural steel - minimum strength 50KSI
Engineered to meet your wind load and building codes.
Full drawings and engineering included.
ASP-4035 3.5 VOC Red Primer or similar.
Further Information:
Power Requirements:
Climate Seal:
Warranty:
Upgrades & Options:
Note:
Hydraulic cylinders, hoses, and fasteners included.
Heavy duty hinges and hydraulic pinpoints.
Options available.
Climate seal around the door delivers a tight seal between door and frame.
Seal across the bottom of the door stops dust and sand intrusion.
Seal across the header protects hinges from dust and excessive moisture.
5-Year : Steel door, steel framework, fixtures and workmanship.
1-Year : Hydraulic pump, door seal, and hydraulic cylinders.
or Upgrade to a 3-Year or 7-Year warranty.
All specifications listed on this page are subject to change without prior notice.
AeroSwing Hydraulic Door
pre-hung inside it's own frame.
Hydraulic cylinders (pair)
Hydraulic pump
Hydraulic lines
Hydraulic hoses
Fixtures and fittings
AeroDoor's step by step hydraulic door installation guide.
AeroDoor's hydraulic door health and safety manual, 2011/2012.
AeroSwing hydraulic doors are the hangar door solution for new or existing aircraft hangars where strength, maximizing access to your opening and low maintenance are all fundamental requirements.
The AeroSwing hydraulic door is simple in design, operation and upkeep. A steel frame door, two hydraulic cylinders and a control unit for up and down operation. Every hydraulic door manufactured by AeroDoor is designed and engineered to our customers dimensions, environment and specific needs. Furthermore choices of sheeting and insulation profile are almost limitless so customers can meet their own aesthetic, thermal efficiency and carbon footprint criteria.
For customers replacing an existing hangar door with our hydraulic door ; in most cases it can be installed against the existing framework and could increase the functional height or width of your opening.
For new hangar construction, little or no headroom is lost, with excellent opportunity to reduce the width or ridge line of the proposed hangar and capital costs.
AeroDoor International, LLC.
2036 Apex Court. Suite A
Apopka, Florida. 32703.
Phone: 1.407.654.0591
Toll Free: 1.866.226.3667
International 001.407.654.0591
Fax: 1.407.464.0893
